您好!欢迎光临上海屿金!
全国24小时服务热线: 17262638997 13361951895(微信)
综合分类

产品中心

Product Center

您当前的位置:首页产品中心Dwyer 防爆差压开关 AT1ADPS系列

返回品牌中心

Dwyer 防爆差压开关 AT1ADPS系列

The ADPS in Flame-Proof ATEX Enclosure

The ATEX approved Series AT1ADPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressure applications in hazardous areas. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The switch is available with settings from 0.08 in w.c. (20 Pa) up to 16 in w.c. (4000 Pa). The silicone diaphragm makes this series ideal for use with air and other noncombustible gases. Flame-proof ATEX enclosures are available in aluminum and can include a glass window for viewing set point status on the adjustment knob.

Important notes for installation:
• Cables must be fitted through 1/2" NPT cable gland or ATEX conduit (not supplied with instrument).
• Make sure after cabling to close tight cover and cable gland, in order to keep IP66 rating (IP65 with option OPV, overpressure relief valve).
• Open cover only after de-energizing instrument.
• Attention: Check local safety rules and warnings on unit and manual for a correct use of the instrument in hazardous area.
Please see SERIES ADPS for non-ATEX approved.

California Residents: Click Here for Proposition 65 WARNING.

1



选项配件

1



机构认证

1



尺寸详图


尺寸图.pdf



产品大图

1



型号列表

1



视频演示

1



相似推荐

1